Dispensers
We have both freestanding and counter top units.
Product Description
- Size: 760 W x 610 D x 560 H
- 150 Kg in 24 Hours
- Requires Plumbing
- With storage bin
- Automatic Cut Off when Ice is Full
- 180 ice cubes per cycle
- 120kg Storage Capacity
- Requires Gravity Drainage
- Square Ice Cubes
- Stainless Steel including the storage bin
- Air filter for condenser
- Ice Full Sensor
- Compressor type: Copeland
- Maximum ambient temperature of 38 Degrees
Connect with Inline Water Filter and Pressure Reducing Valve
Product Description
- Size: 320 W x 380 D x 970 H
- 16 Liters cooler
- With refrigeration
- Compressor Cooled
- Hot and cold water
- 2 Liters cold water per hour – temp 7⁰C to 10⁰C
- 5 Liters hot water per hour – 90⁰C
- Drip Tray
- Drainage port
- Isolating switches
- Unit supplied without bottle
Bottle not included.
The water fountain is connected directly to a water supply and features a built in 3 stage purification system. Typically used in factories, mines, gyms, etc.
Product Description
- Size: 430 W X 330 D X 1020 H
- Cold and ambient
- Stainless Steel
- Compressor Cooled
- 8 Liters Cold water per hour
- Cooling temperature 6⁰C to 10⁰C
- Bubbler connected to chill tank
- 3 stage filtration system
- Goose neck and water bubbler
- Unit must be plumbed in
- Pressure regulating valve supplied.
Filters need to be replaced regularly, dependent on usage and water quality (average 6-12 months).
Note: Filters need to be installed prior to operation, filters are included but not pre-installed.
Features
- 15kg ice maker
- S/Steel finish S/steel hinge pins
- New lid handle
- Bullet type ice
- 12 ice cubes per cycle
- Add water function
- Full ice sensor
- Removable ice bucket
- 3 cube size selection
- Drain point
- Portable
- Approx. 1.8kg ice storage
- Diagnostic check on start up
Benefits
- Compressor is a Snomaster High back pressure compressor which is more robust and works efficiently in higher ambient conditions.
- Sealed PC Board which reduces moisture content and corrosion.
- Copper/aluminium evaporator which is less corrosive that standard steel evaporators.
- Stainless steel pins makes moving parts more durable.
Considerations when choosing an ice maker.
It is important to purchase an ice maker that can cope with SA temperatures i.e. 32 degree Ambient. A lot of available ice makers have been designed to cope with European conditions i.e. based on a 24 degree ambient temperature. This will cause a lower production or even no production of ice in high external temperatures.
Product Description
- Size: 400 W x 540 D x 620 H
- 26 Kg in 24 Hours
- Requires Plumbing
- Automatic Cut Off when Ice is Full
- Low Water Pressure Indicator
- 5 Kg Storage Capacity
- 16 finger / bullet cubes per cycle
- Requires Gravity Drain
- Bullet Ice Cubes
- Stainless Steel finish
- Stainless steel water inlet valve
- Water agitator
- Water recycling function
- On / Off switch
Recommended – to be installed with a pressure regulating valve and filtration system.
Product Description
- Size: 550 W x 610 D x 830 H
- 52 Kg in 24 Hours
- Requires Plumbing
- Automatic Cut Off when Ice is Full Low
- Water Pressure Indicator
- 20kg Storage Capacity
- 32 cubes of ice per cycle
- Requires gravity drain
- Bullet Cube
- Stainless Steel finish
- Stainless steel water inlet valve
- Water agitator
- Water recycling function
- On / Off switch
Connect with Inline Water Filter and Pressure Reducing Valve.
Reduces or removes bacteria, contaminants, chemicals and various heavy metals. Retains the natural minerals, nutrients and good taste of clean water.
- 6 Stage Filtration.
- Reduces chlorine & heavy metals.
- Reduces iron, manganese, antimony and ammonium ions.
- Reduces odours and improves taste.
- Adds essential minerals.
- 14L capacity.
Water is gravity fed through the ceramic filter then passed through the multi-stage cartridge to remove impurities.
Bear in mind that as this is a gravity fed system, the water will require time to pass through the filters.
Actual mineral pot may differ slightly to product image.
The WATEREX system is a new, state of the art water-generating machine that transforms the humidity in the air into pure drinking water by using the latest and most sophisticated technology, while using the minimum amount of electricity.
- Needs no water source, water is generated from the humidity in the air.
- No external pipes, No Bottles, No refilling of water.
- Generates up to 20 litres per day or pristine water.
- Multi-stage filtration ensuring your water is pure.
- Storage tanks hold up to 15 litres of water.
- Three faucets to dispense Hot, Cold and ambient temperatures.
- Energy saving sensors.
Production volume depends on humidity, less than 35% humidity and the unit will not produce water.
Note: You cannot dispense the full 15L it holds at once, you can only dispense ~7L at a time.
Specifications
| Voltage | AC 200-240V | |
| Operation Wattage | 1150 W | |
| Refrigerant (R22 or R407C) | 0.60 Kg | |
| Temperature Range | 21°C - 45°C | |
| Size (cm) | 39.5 x 39 x 110 | |
| Frequency | 50 or 60hz | |
| Heating Wattage | 500W | |
| Storage Capacity | 15 litres | |
| Working Humidity | 40% - 95% | |
| Net Weight | 41.2 Kg |
Schematic (307KB) Kenya Presentation (159KB)*Actual filters may differ to what is shown in the second image, some units do not include the reverse osmosis membrane.
Buy now pay later with Mobicred!
*Available when selecting Payfast as payment method.
NOTE THESE ARE BRAND NEW OR DEMO DISPLAY UNITS WITH BRAND NEW FILTERS AND TESTED.
FREE COURIER DELIVERY IS INCLUDED.
- 1